I had to remove a door panel today, to reattach a nut which had come free from the window mechanism (much rattling). I have attached a zip file with pictures in case it helps somebody in the future. Filenames should make it self-explanatory to:

– prise off housing near mirror and remove Torx T30
– remove Torx T15 screws x 3 on perimeter of panel
– (optionally) remove armrest insert (including the window motor switch) with Torx T15 (noting that the thread for this screw is different from the 3 above, so don’t confuse them when reassembling). Removing this insert gives a good handhold for the next stages
– prise the panel away from the door edge, starting with the top lip at the window. You’ll need to lift the panel a little to get it over the door ledge.
– unpop perimeter press-fit studs (noting that this requires a fair bit of force but will pop off and (I hope) not damage the studs))
– lift off the panel (making sure that the two attached black cables don’t become disconnected unless you want them to)

(Attachment file size limit: I have more pics; please contact me and I can email them to you. [For my reference when you contact me – pictures are dated 10 June 2017].)

CR.