This topic contains 4 replies, has 2 voices, and was last updated by 
-
Posts
-
This is a professionally built Granny Cable using the Mainpine (Viridian) EPC. It is set to 10A, but the cable is 16A single phase and the controller is 32A, if you wanted to reconfigure it. The 2 pole contactor is rated at 20A.
See EVSE Build Day: https://www.youtube.com/watch?v=FFPUdKC2wl0
This is the second one that I’ve built. This time I used an in-line RCD, as the original suffered from some nuisance tripping due to an over-long mains lead before the controller box. I made a similar modification to the original lead, and that has never tripped since either.
This lead has had very little use, as it was left at the MiL’s house.
Price £150 inc. postage to UK
IMG links don’t work on this forum apparently.
https://www.dropbox.com/s/9dbkzn0i9m8q4ow/Granny1.JPG
https://www.dropbox.com/s/6p2ze123v4xm303/Granny2.JPG
https://www.dropbox.com/s/btre1zfsnp4vapc/Granny3.JPGNow sold.
Hi Andy,
Are you planning to make another and sell it? go on…. 🙂
I’ve made one of these for my own use:
You must be logged in to reply to this topic.